If you want to learn any charging solution for Huawei mobile related mobile then you have come to the right place. Here you will be able to learn in a good way how to fix the charging problem of Huawei mobile.
Table of Contents
Introduction
Mobile repairing is an art and today we are showcasing this art.
You will learn how to repair this model correctly.
Today we will learn here the process from how to repair the mobile till the final repair of the mobile.
Problem Checking
To find out the charging problem of Huawei mobile 4 5 steps have to be taken care of
First of all you will check the customer’s data cable. After that we will check the battery Adapter also needs to be checked It’s all the good, only then we can move on to the next one. by going into step will repair the mobile
Dissemble the Huawei set for Mobile charging problem
There are many ways to dissemble a mobile phone. But we behave in a professional manner.
First remove the SIM jack of the mobile And then after that will leave on the separator machine to be heated
Remember to remove the back panel, keep the back side warm. After 104 degree in separator machine You can dissemble the mobile using whatever mobile opener you have.
Checking Mobile Parts
After dissembling the mobile, first of all we will check the battery.
After that we will check the charging strip from the motherboard to the charging board.
If the battery and strip are fine then we will go to the charging board.
You can find the charging jack in the charging board clean it completely with the help of a cleaner
After that we will connect the data cable and check the voltage on it.
After checking these steps if problem were not found, you have to also check mother board in charging section for mobile charging problem
The mobile which came to me today has a hundred percent charging pin problem thats why in today’s topic we will talk about how
To change the charging pin of this mobile, I have followed some steps.
All the components except the pin of the mobile were there in the board All of them were Covered with hit observation tape. It will help to observe and avoid heating.
After that I took out the Charging jack from the motherboard using Hot Gun. All the tips on the board were cleaned through the cleaner.
And apply some paste on it and clean all the points properly with the resolder wire. After cleaning it
Cleaned all five points of the new charging jack with a little soldering wire.
And then with the help of iron set the charging jack well in the board. and after doing all this, the charging problem of this mobile was solved properly. If you also have a similar problem you can solve the problem in this way
Conclusion
Although there are many problems in mobile but the problem of charging is very big. Follow all the steps given above to solve Mobile charging problem. You can earn a lot of money every month by changing the PIN of your mobile in this manner. If the problem is not solved after following all these steps. I have created many topics related to this problem, you can fix the problem of your mobile by reading all these topics.
If you want to learn mobile repairing, this aikhoj.com is the best place. We offered free mobile repairing course basic to advance. Also join our Youtube channel to get more solutions of mobile phones.
